When you are considering street lighting installation in your area, you should consider several factors. These include costs, specifications, permits, and emergency response. Keep in mind that improper use of street lighting can lead to accidents. For this reason, you should also pay attention to two important optical phenomena. This article will provide some insight into these topics. After you read through this article, you should feel confident in implementing street lighting in your area. There are many advantages to doing so, as well as some disadvantages.
Costs of installing street lighting
The costs of installing street lights vary widely. The distance between the lights and the poles that hold them varies from two to three times the height of the pole. A standard marker usually serves as an approximate spacing. Depending on the architecture of the street, the spacing between lights can vary widely. In some places, there are no lights at all. In these cases, the cost to install and maintain them falls on the city or the town.
The cost of installing street lighting can range from $2,000 to $3,000, depending on the area where you live. The cost of installation varies based on the lighting system and the power source used. If you are installing the street lights on a highway, the costs will increase by 20%. The cost of replacing a light pole will be about $4,800. In addition to installation costs, the cost of maintenance is also influenced by the power source.
Specifications
To ensure proper installation, the National Electric Code (NEC) must be followed. Conduit from the service pedestal to the street lights shall be 2 inches in diameter, with a spare for future use. All laterals, including street light connections, shall be installed within the same lane. The minimum depth of the conduits for street lighting shall be 2’0″ below the finish grade. In certain circumstances, deeper depths may be necessary to avoid conflicts with other utilities.
The Street Light Specifications are a supplement to the latest edition of the “Green Book” for Public Works Construction and the City of San Marcos Standard Special Provision. These two documents are intended to be used in conjunction with each other, but are not mutually exclusive. In certain circumstances, one or the other should take precedence. For example, if the street light project has been completed with a permit, the permit holder should submit a plan that identifies the number of poles in the street, and record the pole numbers.
Permits
If you’d like to install street lights on your property, there are certain steps that you should follow in order to obtain the appropriate permits. These permits are issued by the NYC DOT, which is responsible for processing applications and approving relocation plans. You may also need a permit for temporary changes to existing street lighting. For example, you can ask to install or remove lights, or change the location of traffic signals. For both types of permits, you must submit detailed drawings, indemnify the City and hire a licensed electrical contractor.
You will also need to get permits for street lighting if you plan to work in a neighborhood or homeowner’s association. The cost of installing street lighting is determined by the utility company, and the developer must coordinate the installation costs with the utility. Once the permit is issued, you must coordinate the installation with the utility company. The city also requires a permit for any type of street lighting, and the process can take several weeks.
Emergency response
The city of New York requires contractors to respond within four hours during an emergency situation and ten days during all other conditions. Emergency repairs may require more time than the normal repair process, as they may require specialized equipment or a longer response time. Emergency lighting contractors are responsible for reporting any problems to Con Edison as soon as they are noticed. The City’s Street Design Manual contains guidelines for the installation of distinctive luminaires and lampposts. These improvements must be approved by the City’s Public Design Commission and Local Preservation Commission and funded through the elected officials.
Compliance with City standards
If you’re planning to install street lights along a public roadway, you must follow certain standards to avoid violations. These requirements include using the right size, type, and number of wires. The lights must be mounted at least 30 feet above the ground. In some cases, the location may not be lighted by individual street lights. If this is the case, the Public Works Department may decide that fewer lights are sufficient for the area.
Generally, developers must install street lights, conductors, poles, and fixtures in accordance with the city’s Standard Drawings. These standards are designed to ensure safety for pedestrians and drivers. These standards also require that new street lighting systems have underground conductors. Those requirements apply to all types of lighting systems, including the installation of telecommunications devices. However, in some cases, developers must pay for all installation costs, including labor and materials.